dot
dot
หมวดหมู่สินค้าหรือบริการของเว็บไซต์
dot
bulletเทอร์โมคัปเปิล Thermocouple อาร์ทีดี RTD Pt100
bulletRTD,PT100
bulletPT100
bulletPT1000
bulletสายเทอร์โมคัปเปิล สายอาร์ทีดี สาย Pt100
bulletชีทเทอร์โมคัปเปิล Sheath Thermocouple
bulletอาร์ทีดี RTD Pt100 เซนเซอร์ตรวจวัดอุณหภูมิ ละเอียด แม่นยำ
bulletโพรบเทอร์โมคัปเปิลปลายแหลม Penetration Probe
bulletPT100 RTD แบบ 2สาย 3สาย 4สาย
bulletHEATER ฮีตเตอร์
bulletฮีตเตอร์รัดท่อ
bulletฮีตเตอร์ต้มน้ำ ฮีตเตอร์จุ่ม IMMERSION HEATER
bulletฮีตเตอร์ครีบ ฮีตเตอร์ลมร้อน Finned Heater
bulletฮีตเตอร์แท่ง Cartridge Heater
bulletTemperature Controller
bulletTEMPERATURE CONTROLLER
bulletThermocouple Head Explosion Proof,XDA
bulletThermocouple Head Explosion Proof,XDS
bulletINOR-Transmitter Thermocouple and RTD,PT100
bulletเทอร์โมคัปเปิล แบบหัวเกลียว M6 และ 1/2
bulletเทอร์โมคัปเปิล แบบหางปลากลม 5,6,7,8...mm
bulletเทอร์โมคัปเปิลมาตรฐาน ออกสาย
bulletเทอร์โมคัปเปิลมาตรฐาน ออกสาย+สปริง
bulletเทอร์โมคัปเปิลพร้อมเกลียวมาตรฐาน 2,3,4,6,8 หุน
bulletเทอร์โมคัปเปิลแบบเขี้ยวล็อค 1
bulletเทอร์โมคัปเปิลแบบเขี้ยวล็อค 2
bulletเทอร์โมคัปเปิลแบบหัวกะโหลกมาตรฐาน
bulletเทอร์โมคัปเปิลแบบหัวกะโหลกพร้อมเกลียวมาตรฐาน
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-100องศา
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-200องศา
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-300องศา
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-400องศา
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-500องศา
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-1000องศา
bulletเทอร์โมคัปเปิลใช้อุณหภูมิ0-1200องศา
bulletเทอร์โมคัปเปิล type K
bulletเทอร์โมคัปเปิล type J
bulletเทอร์โมคัปเปิล type T
bulletเทอร์โมคัปเปิล type E
bulletเทอร์โมคัปเปิล type B
bulletเทอร์โมคัปเปิล type R
bulletเทอร์โมคัปเปิล type S
bulletเทอร์โมคัปเปิล type N
bulletทฤษฎีเทอร์โมคัปเปิล จาก wiki
bulletThermocouple Type K
bulletThermocouple Type J
bulletThermocouple Type T
bulletThermocouple Type E
bulletThermocouple Type B
bulletThermocouple Type R
bulletThermocouple Type S
bulletThermocouple Type N
bulletPT100 Diameter1.5mm
bulletPT100 Diameter3mm
bulletPT100 Diameter3.2mm
bulletPT100 Diameter4mm
bulletPT100 Diameter5mm
bulletPT100 Diameter 6mm
bulletPT100 Diameter6.3mm
bulletPT100 Diameter 7mm
bulletPT100 Diameter 8mm
bulletPT100 Diameter9.5mm
bulletPT100 Diameter 10mm
bulletPT100 Diameter 10.2mm
bulletPT100 Diameter 12.7mm
bulletPT100 Diameter 15.8mm
bulletPT100 Diameter 17.5mm
bulletPT100 Diameter 19mm
bulletPT100 Diameter 22mm
bulletPT100 Diameter 25.4mm
bulletPT100 wire PVC
bulletPT100 wire TEFLON
bulletPT100 wire Silicone
bulletPT100 wire 1m
bulletPT100 wire 2m
bulletPT100 wire 3m
bulletPT100 wire 4m
bulletPT100 wire 5m
bulletPT100 wire 6m
bulletPT100 wire 7m
bulletPT100 wire 8m
bulletPT100 wire 9m
bulletPT100 wire 10m
bulletOther PT100
bullet3 Wire RTD Sensor
bullet4 Wire RTD
bulletTW-50
bulletTHERMOCOUPLE HEAD
bulletTHERMOMETER
bulletRM1006C
dot
ฮีตเตอร์ , HEATER
dot
bulletฮีตเตอร์แท่ง
bulletฮีตเตอร์ครีบ
bulletฮีตเตอร์แผ่น
bulletฮีตเตอร์บ้อบบิน
bulletฮีตเตอร์อินฟราเรด
bulletอินฟราเรด ฮีตเตอร์
bulletHEATER INFRARED
bulletINFRARED HEATER
bulletปลอกสายทนความร้อน
bulletOMEGA Thermocouple


THERMOCOUPLE
ฮีตเตอร์ อุตสาหกรรม เทอร์โมคัปเปิล


KOYO PLC

KOYO PLC

KOYO PLC  Direct LOGIC PLC – an international brand from Japan

We independently developed the KOSTAC PLC, a workplace-oriented stage-type programmable controller, and are providing this easy-to-use product to customers around the world. An identical-concept SFC programming method is used in PLC IEC/JIS standards, testifying to the international recognition of its superiority. Now is truly the information age, and we are providing variety of open network solutions to the worldwide customer through our global brand “Direct Logic PLC”.

DirectLOGIC 05  DirectLOGIC 05 
The DL05 series PLC offers with features you won't find in most bricks - 6 I/O combinations of AC, DC and relay I/O, and advanced programming functions such as PID and drum sequencing. 8 inputs and 6 outputs
2K program memory
4K data memory
2 communication ports
129-instructions, including 4 PID loops
Removable terminal block
12/24VDC powered versions
Discrete and analog I/O option modules
Thermocouple and RTD temperature input modules.
1-channel high speed input/pulse output module(H0-CTRIO)
Memory cartridge/real-time clock option module
CUnet,DeviceNet™ slave,Ethernet,and Profibus option module

DirectLOGIC 06  DirectLOGIC 06 

DL06 is our first micro PLC to combine its fixed I/O of 20 inputs and 16 outputs with four option card slots for expansion (discrete, analog, communication modules), all in the same package. With the DL06, you can use the same PLC panel layout for all applications from 36 to 100 I/O.
20 inputs and 16 outputs
7.5K program memory
7.3K data memory
2 communication ports,including built-in RS232/RS422/RS485 port
229 instructions, including eight PID loops and ASCII
Removable terminal blocks
Built-in 3A 24VDC auxiliary power supply for field devices
12/24VDC powered versions
Built-in real-time clock/calendar
Discrete and analog I/O option modules
Thermocouple and RTD temperature input modules.
1-channel high speed input/pulse output module(H0-CTRIO)
Memory cartridge/real-time clock option module
CUnet,DeviceNet™ slave,Ethernet,and Profibus option module
Optional plug-in LCD display

DirectLOGIC 205  DirectLOGIC 205 

If your application requires the flexibility of a modular control system, a DL205 PLC is the lowest cost, most versatile solution you'll find. Check out all our modules, bases and communication options.
AC/DC discrete input/output, up to 32 points per mobule
10 amp relay out
12-bit and 16-bit analog inputs and outputs
Temperature inputs(t/c and RTD)
Data communications, including CUnet,serial and Ethernet modules
Counter input/pulse output
Remote I/O master and slave
H2-CTRIO, 4-channel high speed counter/pulse output
H2-EBC, Ethernet slave base controller

DirectLOGIC 305  DirectLOGIC 305 

The DL305 series is a small modular PLC that has been marketed by various name brand PLC manufacturers for over 20 years. This Koyo design revolutionized the small PLC market, and is still a good performer and a great value.
Three standard CPUs, including the D3-350 with PID control and two communication ports
5, 8 and 10 slot bases
110/220VAC or 24VDC power supply
AC, DC inputs
AC, DC, and relay outputs
8 or 12-bit analog input/output
Specialty modules include ASCII/BASIC module, high-speed counter, and communication interface module

DirectLOGIC 405  DirectLOGIC 405 

The DL405 product line packs a lot of power for its size and price. It has the widest variety of I/O modules and configurations of all our PLCs.
AC/DC discrete input/output, up to 64 points per module
10 amp relay out
12-bit and 16-bit analog inputs and outputs
Thermocouple and RTD inputs
Data communications, including serial and Ethernet modules
Counter input
Remote I/O master and slave modules
Ethernet I/O master and slave modules
New high-speed counter module
16 PID loops built in, up to 96 with option modules

Terminator I/O Module  Terminator I/O Module

Terminator I/O provides you with an industrial I/O system with remote I/O, distributed I/O and digital I/O module capabilities. It combines the I/O points with their field terminations into a modular package to save panel space and money. With Terminator I/O, you can use distributed I/O nodes close to field devices for faster and more efficient wiring and troubleshooting.
Terminator I/O was custom-designed by Koyo (the same people who designed the original GE Series One PLC), a trusted name in control technology since 1983.
Network interface modules supporting Ethernet, Profibus, DeviceNET, MODBUS and Koyo remote I/O; some adapters include an on-board RS232 serial port.
Discrete and analog industrial I/O modules with modular terminal bases
Configuration flexibility by plugging together a network interface module with up to 16 I/O modules.
Use local expansion for large I/O drops. No more confining I/O bases.
AC or DC power supplies. For high power systems, combine multiple supplies on a single I/O set.
Horizontal or vertical DIN rail mounting

PZ  PZ 

PZ Series
Board Type PLC
The best for OEM at a no brand
Include High Speed Counter
2K Program Memory(PZ1/2)
7.5K Program Memory(PZ3)

DirectSOFT 5  DirectSOFT 5

Our powerful Windows-based DirectSOFT programming package is new and improved. With many new instructions, programming is now easier, quicker and more intuitive than ever. Improved viewing options and customizable tool bars make it easier to program and monitor your PLC system.
With DirectSOFT5, documentation can be exported for use in other applications such as our ViewJetCmore operator interface panels. User Interface Themes allow operators to create a unique look and feel for the DirectSOFT programming environment. The dockable window feature allows relocation of Cross Reference and Data views. The ability to auto-hide or even tear away views and place them outside the DirectSOFT5 work space optimizes full ladder viewing.
The product offering has been simplified to a full support PC-DSOFT5 package that programs all of our DirectLogic PLCs, and our new PC-DS100 package, which is a full-featured FREE programming package with a 100 word limitation. (DS100 is only available by download from our Web site)."

Handheld Programmers  Handheld Programmers

D2-HPP
D4-HPP
DirectView 1000 Text Panel

Ethernet Products and Accessories  Ethernet Products and Accessories

With an E-SW05U switching an isolated control LAN, your programmable logic controller (PLC) won't miss a beat.

At 10 or 100 Mbps Ethernet, your data will spend minimal "time-on the-wire" between your I/O and the controller. The E-SW05U, an Ethernet switch, automatically determines and remembers the devices connected to each port and routes messages only through the appropriate port. When directly connected to a full duplex device, the E-SW05U port automatically adopts full duplex operation, potentially doubling the bandwidth to that device.

The E-SW05U also provides broadcast storm protection with each node limited to no more than 25% of the available LAN bandwidth.

Signal Conditioners  Signal Conditioners

Signal integrity starts with quality measurement and good equipment. However, even with the best equipment signals can be degraded if the equipment is not properly installed or is not protected by signal conditioners. Signal integrity can be greatly impacted by poor shielding and wiring practices. The biggest factor is ground loop errors (ground noise). Our signal conditioner products protect your expensive electronic equipment against ground loops with up to 1500 V of isolation.
Isolation is one way to eliminate ground loop errors caused by ground noise and other such problems. Isolation means using one of many electronic methods to interrupt the connections between two grounds while passing the correct signal with little or no loss of accuracy. Without a way for ground currents to flow, these currents can't induce signal errors.




thermocouple RTD Pt100 แบบต่าง ๆสามารถสั่งทำตามแบบ ตามตัวอย่าง

thermocouple RTD Pt100 แบบต่าง ๆสั่งทำตามแบบ article
KOYO Rotary Encoder article
สินค้าหรือบริการที่ 3 article



Copyright © 2010 All Rights Reserved.
เลขทะเบียนพาณิชย์อิเล็กทรอนิกส์ เลขที่ 0135549007974 IES ELECTRIC CO.,LTD.